બાયસેગ કાર્યક્રમ માટેના સેટીંગ્સ

How to set BISAG DTH system

DTH System consists the following equipments:

1)  90CM Dish Antenna

2)  Universal LNBF

3)  Low Loss RF cable (RG-6)

4)  Satellite Receiver with Remote Controller (SATTOP Box)

5)  Audio Video Cable

6) TV/Projector/LCD Display

Step by step Procedure to setup DTH system:

1)    First install the Dish Antenna and put the LNBF

2)    One of the ends of RF cable connects to LNBF and other connects to Satellite             Receiver’s (SATTOP Box) LNB In port

3)  Then connect Audio Video cable from SATTOP Box to TV/Projector/LCD.

4)    Give power supply to TV and SATTOP Box and Switch On both

5)    Do AV mode with remote of TV/Projector/ LCD/Plasma

6)    For projector select input signal with projector’s remote

              

Set the following parameters in SATTOP Box with remote control

Channel Name: TDCC BISAG 1		Channel Name: TDCC BISAG 2
Receive Frequency: 11523MHz		Receive Frequency: 11526 MHz
Symbol Rate: 01700 KSPS		Symbol Rate: 01700 KSPS
Polarization: Horizontal		Polarization: Horizontal
FEC: Auto		FEC: Auto
LNB Type: Ku Band		LNB Type: Ku Band
LNB Low Frequency: 9750 MHz		LNB Low Frequency: 9750 MHz
LNB High Frequency: 10600 MHz		LNB High Frequency: 10600 MHz
LNB Power: On		LNB Power: On